Easy Coat Doors & Trims Gloss Enamel

    Formulated for easy brushing ,resist abrasions and knocks , ideal for doors architraves and trim. For use on both interior and exterior surface.
    Vandyke Red
    Change Colour
    Size
    Paint Calculator
    This product is not for online sale and can only be purchased from selected stores.
    Find a Store
    Your Measurements:
    Amount Needed:
    For the best result we recommend to use {coatAmount} for {productTitle}
    Key information
    • Finish Gloss
    • Coverage 14m2/L
    • Drying Time Touch Dry
      1-2 Hours
      Recoat
      5-6 hours under normal conditions
      (In damp or humid conditions drying time may be lengthened)
    • Coats 2
    Product Features
    • MIRROR FINISH
    • LONG LASTING PROTECTION

    Product Description

    A premium solvent-based high gloss finish that when dried provides a smooth mirror like finish. It is a hard wearing finish that can be applied on both interior and exterior surfaces.

    Application Description

    For WOOD surface apply Prep right Traditional Undercoat and 2 COATS of
    Easycoat Door & Trim Gloss Enamel

    METAL surface apply 1 COAT of Prepright Grey Green Primer and 1UNDERCOAT of
    Prepright Traditional Undercoat and two coats of Easycoat Door & Trim Gloss Enamel

    Apply using brush & roller

    Health & Safety

    Dangerous for the environment. In the event of an accident contain and collect spillage using sand or earth. Avoid contact with skin or eyes. Wear eye/hand protection
    Download Adobe Reader

    Tips & Advice

    • 1. Preparing the Surfaces
      New Surface
      Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
      New galvanized and aluminum surfaces should be cleaned and degreased, then pre-treated with an appropriate pre-treatment primer to ensure good adhesion.

      Previously Painted Surfaces
      Surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.
      Steel surfaces should be manually prepared by power or hand tool. For optimum performance
    • 2. Cleaning
      Clean all equipment with Mineral Turpentine immediately after use
    • 3. Storing
      Keep container lip closed and in an upright position. Store in a cool shaded place.

    How much paint do I need?

    Measure your dimensions

    Do you know the area?

    Enter your measurements

    Paintable area

    {{!-- The value will be injected with JavaScript --}}
    {{!-- The value will be injected with JavaScript --}}
    m²

    More than one wall to paint? Try our advanced paint calculator

    Measure the height and length of the surface you want to paint (in metres or centimetres).

    Your Measurements:

    {{!-- This value will be injected with JavaScript --}}

    Amount needed:

    {{!-- This value will be injected with JavaScript --}}

    This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.

    More than one wall to paint? Try our advanced paint calculator

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Add a new job

    • Kitchen
    • Bedroom
    • Living room

    Edit a job

    Delete job

    Delete job

    Are you sure? All notes, photos and saved items will be deleted.

    Save colour

    Vandyke Red

    Save to My Workspace

    Save product

    Easy Coat Doors & Trims Gloss Enamel

    Save job

    Sorry, we couldn't find any results
    Fetching the data, please wait...