Good to see you!
Otherwise login by email.
Welcome to Taubmans
Otherwise login by email.
Terms and Conditions
Registration complete
Successfully registered, please login
Registration complete
Forgotten your password?
Please enter email address associated to your account
Change Password
Password changed successfully.
Request sent!
For more tailored inspiration, please fill in the 3 questions below.
Thanks!
We will send you colourful news every now and then.
Delete Account
Easy Coat Doors & Trims Satin Enamel
-
Finish Satin
-
Coverage 14m2/L
-
Drying Time 5-6 hours under normal conditions
(In damp or humid conditions drying time may be lengthened) -
Coats 2
-
LONG LASTING PROTECTION
-
MIRROR FINISH
Product Description
Application Description
Easycoat Door & Trim Satin Enamel.
METAL surface apply 1 COAT of Prepright Grey Green Primer and 1UNDERCOAT of
Prepright Traditional Undercoat and two coats of Easycoat Door & Trim Satin Enamel.
Apply using brush & roller
Health & Safety
Tips & Advice
-
1. Preparing the SurfacesNew Surface
Surfaces generally must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
Previously Painted Surface
Previously painted surfaces should be thoroughly rubbed down using a suitable abrasive paper and then dusted off.
Galvanised Metal Surfaces
Steel surfaces should be manually prepared by power or hand tool to BS 7079 Part A1:1989 St3. For optimum performance new galvanized and aluminum surfaces should be cleaned and degreased, then pre-treated with an appropriate pre- treatment primer to ensure good adhesion -
2. CleaningClean all equipment with Mineral Turpentine immediately after use
-
3. StoringKeep container lip closed and in an upright position. Store in a cool shaded place.
How much paint do I need?
More than one wall to paint? Try our advanced paint calculator
Measure the height and length of the surface you want to paint (in metres or centimetres).
Your Measurements:
{{!-- This value will be injected with JavaScript --}}
Amount needed:
{{!-- This value will be injected with JavaScript --}}
This is an estimated based on 2 coats. Actual coverage will depend on the conditions of the surface. If the colour change is strong, more coats may be required.
Add a new job
Add a new job
Edit a job
Delete job
Are you sure? All notes, photos and saved items will be deleted.
Save colour
Save to My Workspace
Save product
Easy Coat Doors & Trims Satin Enamel
Save job